Gimbal Calibration Guide
- Connect the remote controller to your phone, press the remote controller's power button and hold for 2 seconds to turn it on.
- Remove the gimbal's protective cover.
- Turn on the aircraft by pressing the power button and holding it for 3 seconds.
- Open the Autel SKY App.Click "Start", enter the image transmission interface, click the "Setting" menu in the top right and select "Control" --> "Gimbal Calibration" --> "Auto Calibration".
- The Gimbal will rotate as it begins to auto calibrate, while calibrating, do not turn off the aircraft or remote controller, please keep the aircraft still until the App says the calibration was successful.
